About Us

Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Donec quam felis, ultricies nec, pellentesque eu, pretium quis, sem.

Software suite solutions

Here are our available software components, providing a full end to end 3GPP release 13 solution.
They are available as a pure software license or in an integrated PC depending on your needs.
To get them, please check our product line.

enb

eNB


  • MIMO support, multi-cell, CA up to 5 cells
  • Category NB1 and M1
  • 1000 simultaneously radio connected UEs
  • Handovers, S1 compliant…

CONTACT US

Looking for a radio frontend? Please check our PCIe SDR card or consult our SDR and RRH partners.

enb

eNB


PHY layer:

  • LTE release 13 compliant
  • FDD and TDD configurations
  • Tested bandwidths: 1.4, 3, 5, 10, 15 and 20 MHz
  • Handle several cells in intra-band or inter-band configurations
  • Transmission modes: 1 (single antenna) and 2 to 10 (MIMO 4×2)
  • Wideband CQI/PMI reports
  • HARQ support
  • Timing measurement thru the PRACH
  • Closed-loop UE power control
  • Frequency based MMSE equalizer
  • Highly optimized software turbo decoder
  • PAPR reduction support
  • Support of other radio heads can be added with an external shared library.
  • Positioning Reference Signals (PRS) support
  • CSI-RS support
  • Multi-cluster PUSCH allocation
  • PUCCH 3 and PUCCH channel selection support
  • Carrier Aggregation support with cross carrier scheduling (tested with 3 DL channels, supports up to 5 DL channels)
  • CoMP testing features (DMRS scrambling identity and QCL parameters can be selected)
  • 256QAM DL support for PDSCH and MBMS
  • Support of release 11 TDD special subframe configurations 7 and 9
  • EPDCCH support for Category M1

Protocol Layer:

  • LTE release 13 compliant
  • Implements the MAC, RLC, PDCP and RRC layers
  • Proportionally fair MAC scheduler with QoS support
  • Support of full and half duplex UEs
  • DRX support
  • Number of active users only limited by the available bandwidth.
  • Fully configurable System Information Blocks
  • Integrity check and encryption using the AES and Snow3G algorithms
  • Support of RRC measurement with measurement gap
  • Supports intra eNodeB, S1 or X2 handovers
  • QoS support with user selectable DRB configuration for each QCI
  • ROHC support (RTP, UDP and IP v1 profiles)
  • Public Warning System (CMAS/ETWS) support
  • MBMS support
  • Category 0 UE support
  • Category M1 UE support

NB-IoT:

  • NB-IoT release 13 compliant
  • Single-tone and multi-tone category NB1 UE support
  • 15 kHz and 3.75 kHz subcarrier spacing are supported.
  • All operation modes (in-band, guard band and standalone) are supported.
  • Multiple NB-IoT and LTE cells can be used at the same time in the same eNodeB.
  • Support of multiple coverage levels
  • Support of all NPDCCH, NPDSCH, NPUSCH and NPRACH configurations
  • Support of control plane CIoT optimization
  • Support of multi-DRB mode

Radio interface:

  • C radio API to integrate any radio device
  • Compatible with various SDR platform and high power RRH.

Network interface:

  • Standard S1AP and GTP-U interfaces to the Core Network. Several PLMNs and S1 interfaces can be used simultaneously.
  • X2AP interface between eNodeBs
  • M1 and M2 interfaces for MBMS
  • IPv6 support

User interface:

  • Configurable logging system for all channels with built-in text decoders
  • Wireshark MAC-LTE capture
  • Plots for QAM constellations and channel response
  • Remote API using WebSocket
  • Command line monitor
  • Test commands to initiate handover and to dynamically change the power level of each cell

epc

EPC


  • Compact core network including MME/S-GW/P-GW/HSS
  • Fully Linux network stack integrated
  • Optimized for access point model

CONTACT US

enb

EPC


MME:

  • Implements one MME with built-in SGW, PGW and HSS
  • Supports several eNodeBs with standard S1 interface (S1AP and GTP-U protocols)
  • NAS integrity check and encryption using the AES and Snow3G algorithms
  • Support of USIM cards using the XOR or Milenage authentication algorithm
  • Handling of UE procedures: attach, authentication, security configuration, detach, tracking area update, service access, radio bearer establishment, paging
  • Multi-PDN support and built-in dynamic ERAB setup for easy VoLTE/IMS testing
  • Transparent access to the IP network (no external Serving Gateway nor PDN Gateway are necessary); Configurable access point name, IP range, DNS and E-RAB QoS
  • Support of NB-IoT RAT and of control plane CIoT optimization
  • Configurable user database; No external HSS is needed.
  • Support sending of Public Warning System messages (ETWS/CMAS)
  • IPv6 support
  • Configurable logging system for all channels with built-in text decoders
  • Remote API using WebSocket
  • Command line monitor

IMS server:

  • Implements P-CSCF with built-in I-CSCF, S-CSCF and HSS
  • Support of SIP protocol
  • Support of MD5, AKAv1 and AKAv2 authentication
  • Support of ISIM cards using the XOR or Milenage authentication algorithm
  • Support of IPSec (ESP/transport, all algorithms)
  • Support of voice and video calls between UEs
  • Support of voice and video echo test
  • Support of SMS (GSM 3.40) using SIP MESSAGE and SMS over SG
  • Configurable user database; No external HSS is needed.
  • Command line monitor

MBMS Gateway:

  • User configurable list of service and multicast components
  • M2AP protocol support
  • Generate one stream per service over the M1 interface (GTP + SYNC protocols)
  • Built-in test RTP packet generator

ue simulator

UE SIMULATOR


  • Up to 1000 handled UEs
  • Multi-cell, CA
  • IP simulation: UDP, TCP, VoIP, third party app

CONTACT US

Looking for a radio frontend? Please check our PCIe SDR card or consult our SDR and RRH partners.

ue simulator

UE SIMULATOR


LTE:

  • Simulate a large number of UEs sharing the same spectrum
  • LTE Release 8 support with features up to Release 13
  • Bandwidths: 1.4, 3, 5, 10, 15 and 20 MHz
  • MIMO DL support
  • MBMS support
  • Category M1 support
  • Category NB1 (NB-IoT) support with multi-tone and multi-DRB
  • Includes PHY, MAC, RLC, PDCP, RRC and NAS layers
  • IP traffic simulator (ping, constant bitrate UDP, HTTP)
  • Remote API based on Websocket and JSON
  • Works with a non-dedicated radio interface such as the Ettus USRP N210

Radio interface:

  • C radio API to integrate any radio device
  • Compatible with various SDR platform and high power RRH.

User interface:

  • Configurable logging system for all channels with built-in text decoders
  • Plots for QAM constellations and channel response
  • Command line monitor and WebSocket remote API
  • Web interface for scenario creation

@OrangeFabFr 1⃣@amarisoft : logiciel spécialisé dans les infra télécom mobiles LTE #TelecomTrack #OrangeStartup

@LatoucheP présente @OrangeFabFr les 4 startups lauréates de #TelecomTrack S1 #OrangeStartup @amarisoft @Horizon_cs @athonet_primo #Adipsys

@LatoucheP présente @OrangeFabFr les 4 startups lauréates de #TelecomTrack S1 #OrangeStartup @amarisoft @Horizon_cs @athonet_primo #Adipsys

AMARI LTE 100 license and AMARI UE 100-x licenses are now available as floating licenses. https://t.co/4yJXIuHzbG

AMARI LTE 100 license and AMARI UE 100-x licenses are now available as floating licenses. https://t.co/4yJXIuHzbG

Software-defined #5G base station: @amarisoft software suite in action at #MWC17, Ubuntu - LimeSDR booth

Software-defined #5G base station: @amarisoft software suite in action at #MWC17, Ubuntu - LimeSDR booth

Amarisoft software suite in action at #MWC17, Actility booth

Amarisoft software suite in action at #MWC17, Actility booth
Load More...